Suite of Traveling Wave Tube Amplifiers at Boston International Microwave Symposium June 4-6 Features Wide Frequency Bandwidth for Reliability, High Duty Cycle to Support Multiple Platforms
Fremont, Calif. – May 29, 2019 – dB Control, an international defense electronics manufacturer, will exhibit four high-power, rack-mount, pulsed traveling wave tube amplifiers at the International Microwave Symposium (Boston, June 4-6) in Booth 1416. On average, these TWTAs offer the highest power available from dB Control and feature high duty cycles of operation. Overall, the suite of TWTAs covers a 4 to 18 GHz frequency range at various power levels (2,000 to 4,000 Watts) to ensure high-performance and reliability in a wide range of radar, electronic countermeasures and electronic warfare applications. The amplifiers incorporate military-grade TWTs and high-voltage power supplies to enable use in both defense or commercial applications.
- dB-3778B: 4-8 GHz. C-band frequency range, 3700 Watts peak power at 6% maximum duty cycle. Ethernet interface.
- dB-3779G: 8-12 GHz. X-band frequency range, 4000 Watts peak power at 8% maximum duty cycle. Ethernet interface.
- dB-3799B: 8-18 GHz. I/J-band frequency range, 2000 Watts peak power at 5% maximum duty cycle. Ethernet interface.
- dB-3813B: 12-18 GHz. Ku-band frequency range providing 3300 Watts peak power at 6% maximum duty cycle.
All four TWTAs feature standard 19-inch rack-mount configuration with integral forced-air cooling and very low phase noise. Custom interface protocols are available, such as Ethernet, RS-232, RS-422, RS-485 and others. More information about these TWTAs and other dB Control products will be available at IMS in Booth 1416.
About dB Control
Established in 1990, dB Control Corp., a subsidiary of HEICO Corp., supplies mission-critical, often sole-source, products worldwide to military organizations, as well as to major defense contractors and commercial manufacturers. The company designs and manufactures reliable high-power TWT Amplifiers (TWTAs), microwave power modules (MPMs), transmitters, and high-voltage power supplies with modulators for radar, electronic countermeasures (ECM), and datalink applications. dB Control also offers specialized contract manufacturing, transformer winding and testing, full vacuum encapsulation, pressure cure, conformal coating and repair depot services from its modern 40,000-square-foot facilities in Fremont, California. More information is available by calling +1 (510) 656-2325 or emailing Steve Walley (email@example.com).
Steve Walley, dB Control, 510-656-2325
Vanessa Bradford, C3PR, 209-505-3690